Master 33 Twin

Master 33 Twin are the new Intermac work centres equipped
with an operating head with two spindles.
This device significantly revolutionises the way in which we are
accustomed to imagining work centres. In fact, if, on the one hand,
this type of machine has always been known for maximum flexibility
with which the different machining operations could be carried out,
on the other, at times the same result could also be obtained
by resorting to compromise in terms of productivity.
With the double wheel operating head, the machining is carried
out simultaneously by two wheels running along the same profile
of the sheet. In this way, it is possible to increase productivity
by up to 40%. Neither does the double wheel sacrifice flexibility.
In fact, it is possible to exclude one of the two operating units
and carry out the same operations as those performed by the
Intermac work centres.

Tool change optimisation

The Master 33 Twin is equipped with 2 tool changes,
one 12-position and one 14 -position. In the 12-position tool
change, the head changes two tools at the same time before
continuing with the machining operations in which the two heads
are used simultaneously. The 14-position tool change houses the
aggregates, mills and all the machining tools used by a single
operating unit.